SeaSTAR 3510LR Bedienungsanleitung PDF herunterladen (Seite 15)

3510LR USER MANUAL

Issue 1.0 11/04

RECEIVER INTERFACES

Power

The 3510LR will operate on any DC Voltage between 10V and 32V DC. When

operational, the unit dissipates 4W of power.

The power input has reverse polarity protection. However, as the negative terminal

is also attached to the housing ground, large currents can flow to any ground

attachments made to the housing. Reverse polarity must therefore be avoided to

prevent damage to the vehicle supply.

At Voltages below 10V the unit will reset itself to prevent any data loss. At

Voltages below 6V the receiver will turn itself off.

Power is connected to the unit via a 2 metre long, black sheath, red & black 2-core

cable. The cable is terminated with a 3-pin Switchcraft EN3C3F female connector.

The connector pin layout is illustrated in Figure 4.

Figure 4. Pin layout of Switchcraft EN3C3F Female Connector

The Switchcraft EN3C3F connector is terminated as follows:

Pin 1 + DC voltage (red)

Pin 2 Not connected

Pin 3 – DC voltage (black)

Pin 1

Pin 2

Pin 3

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 49 50

Keine Kommentare

SeaSTAR 3510LR Bedienungsanleitung Seite 15